Litteratur om renhet och hygien
Här nedan finns ett urval av böcker och dokument som rör renhet och hygien
HEPA and ULPA Filter IEST-RP-CC-001.3Institute of Environmental Sciences and Technologies (1993) ISBN 1-877862-40-1
Unidirectional Flow Clean-Air Devices
IEST-RP-CC-002-86
Institute of Environmental Sciences and Technologies (1986)
ISBN 1-877862-69-X
Garments System Considerations for Cleanrooms and Other Controlled
Environments IEST-RP-CC-003.3
Institute of Environmental Sciences and
Technologies (1993) ISBN 1-877862-33-9
Evaluating Wiping Materials Used in Cleanrooms and Other
Controlled Environments IEST-RP-CC-004.2
Institute of Environmental Sciences
and Technologies (1992) ISBN 1.877862-30-4
Gloves and Finger Cots Used in Cleanrooms and Other Controlled
Environments IEST-RP-CC-005.2
Institute of Environmental Sciences and
Technologies (1997) ISBN 1-877862-49-5
Testing Cleanrooms IEST-RP-CC-006.2
Institute of Environmental
Sciences and Technologies(1993) ISBN 1-877862-26-6
Testing ULPA Filter IEST-RP-CC-007.1
Institute of Environmental
Sciences and Technologies (1992) ISBN 1-877862-37-1
Gas-Phase Adsorber Cells IEST-RP-CC-008-84
Institute of
Environmental Sciences and Technologies (1999)
Compendium of Standards, Practices, Methods, and Similar Documents
relating to Contamination
Control IEST-RD-CC-009.2
Institute of
Environmental Sciences and Technologies (1998) ISBN 1-877862-29-0
A Glossory of Terms and definitions relating to Contamination
Control IEST-RD-CC-011.2
Institute of Environmental Sciences and Technologies
(1998)ISBN 1-877862-28-2
Considerations in Cleanroom Design IEST-RP-CC-012.1
Institute
of Environmental Sciences and Technologies (1993) ISBN 1-877862-31-2
Equipment Calibration & Validation Procedures
IEST-RP-CC-013-86-T
Institute of Environmental Sciences and Technologies
(1986)
Calibrating Particle Counters IEST-RP-CC-014.1
Institute of
Environmental Sciences and Technologies (1999)
Cleanroom Production and Support Equipment
IESR-RP-CC-015-87-T
Institute of Environmental Sciences and Technologies
(1987)
The Rate of Decomposition of Nonvolatile Residues in Cleanrooms
IEST-RP-CC-016.1
Institute of Environmental Sciences and Technologies (1992)
ISBN 1-877862-32-0
Cleanroom Housekeeping – Operating and Monitoring Procedures
IEST-RP-CC-018.3
Institute of Environmental Sciences and Technologies (2002)
ISBN 1-877862-36-3
Substrates and Forms for Documentation in Cleanrooms
IEST-RP-CC-020.2
Institute of Environmental Sciences and Technologies (1998)
ISBN 1-877862-48-7
Testing HEPA and ULPA Filter Media IEST-RP-CC-021.1
Institute
of Environmental Sciences and Technologies (1993) ISBN-1-877862-21-5
Electrostatic Charge in Cleanrooms and Other Controlled
Enviroments IEST-RP-CC-022.1
Institute of Environmental Sciences and
Technologies (1992) ISBN 1-877862-22-3
Microorganisms in Cleanrooms IEST-RP-CC-023.1
Institute of
Environmental Sciences and Technologies (1993) ISBN 1-877862-23-1
Measuring and Reporting Vibration in Microelectronic Facilities
IEST-RP-CC-024.1
Institute of Environmental Sciences and Technologies (1994)
ISBN 1-877862-24-X
Cleanroom Operations IEST-RP-CC-026.1
Institute of
Environmental Sciences and Technologies (1994) ISBN 1-877862-25-8
Personnel Practices and procedures in Cleanrooms and Controlled
Environments IEST-RP-CC-027.1
Institute of Environmental Sciences and
Technologies (1999) ISBN 1-877862-65-7
Minienvironments IEST-RP-CC-028.2
Institute of Environmental
Sciences and Technologies (1999)
Automotive Paint Spray Applications IEST-RP-CC-029.1
Institute
of Environmental Sciences and Technologies (1999)
Building Code reference Handbook: A Guide to Alternative Code
Complience Issues in the Semiconductor Industry IEST-RD-CC-033.1
Institute of
Environmental Sciences and Technologies (1998) ISBN 1-877862-71-1
HEPA and ULPA Filter Leak Tests IEST-RP-CC-034.1
Institute of
Environmental Sciences and Technologies (1999) ISBN 1-877862-681-1
ISO 14644 - 1 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness
ISO 14644 - 2 Cleanrooms and associated controlled environments - Part 2: Specification for testing and monitoring to prove continued compliance with ISO 14644-1
ISO 14644 – 3 Cleanrooms and associated controlled environments - Part 3: Metrology and test methods
ISO 14644 – 4 Cleanrooms and associated controlled environments - Part 4: Design, construction, and start-up
ISO 1464 4- 5 Cleanrooms and associated controlled environments - Part 5: Cleanroom operations
ISO 14644 - 6 Cleanrooms and associated controlled environments - Part 6: Terms and definitions
ISO 14644 - 7 Cleanrooms and associated controlled environments - Part 7: Enhances clean air devices
ISO 14644 - 8 Cleanrooms and associated controlled environments - Part 8: Molecular contamination
ISO 14698 - 1 Cleanroom technology – biocontamination control - Part 1: General principles
ISO 14698 – 2 Cleanroom technology – biocontamination control - Part 2: Evaluation and interpretation of biocontamination data
ISO 14698 – 3 Cleanroom technology – biocontamination control - Part 3: Methodology for measuring the efficiency of processes of cleaning and (or) disinfection of inert surfaces bearing biocontaminated wet soiling or biofilms
ISO 8573 - Quality of Compressed Air: Part 1 – Contaminants and purity classes
ISO 8573 - Quality of Compressed Air: Part 2 – Test methods for aerosol oil content
ISO 8573 - Quality of Compressed Air: Part 3 – Test method för measurement of humidity
ISO 8573 - Quality of Compressed Air: Part 4 – Test method for solid particle content
ISO 8573 - Quality of Compressed Air: Part 5 - Determination of oil vapour and organic solvent content
ISO 8573 - Quality of Compressed Air: Part 6 - Determination of content of gaseous contaminants
ISO 8573 - Quality of Compressed Air: Part 7 – Test method for viable microbiological contaminant content
ISO 8573 - Quality of Compressed Air: Part 8 – Contaminants and purity classes (by mass concentration of solid particles)
ISO 8573 - Quality of Compressed Air: Part 9 – Test method for liquid water content
Microbiologically Safe Continuous Pasteurisation of Liquid Foods - European Hygienic Equipment Design Group (1992) EHEDG Doc 1
A Method for Assessing the In-Place Cleanability of Food Processing Equipment - European Hygienic Equipment Design Group (2000) EHEDG Doc 2
Microbiologically Safe Aseptic Packing of Food Products - European Hygienic Equipment Design Group (1993) EHEDG Doc 3
A method for the Assessment of In-Line Pasteurisation of Food Processing Equipment - European Hygienic Equipment Design Group (1993) EHEDG Doc 4
A method for the Assessment of In-Line Sterilisability of Food Processing Equipment - European Hygienic Equipment Design Group (1993) EHEDG Doc 5
The Microbiologically Safe Continuous Flow Thermal Sterilisation of Liquid Foods - European Hygienic Equipment Design Group (1993) EHEDG Doc 6
A Method for the Assessment of Bacteria Tightness of Food Processing Equipment - European Hygienic Equipment Design Group (1993) EHEDG Doc 7
Hygienic Equipment Design Criteria - European Hygienic Equipment Design Group (1993) EHEDG Doc 8
Welding Stainless Steel to Meet Hygienic Requirements - European Hygienic Equipment Design Group (1993) EHEDG Doc 9
Hygienic Design of Closed Equipment for the Processing of Liquid Food - European Hygienic Equipment Design Group (1993) EHEDG Doc 10
Hygienic Packing of Food Products - European Hygienic Equipment Design Group (1993) EHEDG Doc 11
The Continuous or Semi-Continuous fFow Thermal Treatment of Particulate Foods - European Hygienic Equipment Design Group (1994) EHEDG Doc 12
Hygienic Design of Equipment for Open Processing - European Hygienic Equipment Design Group (1996) EHEDG Doc 13
Hygienic design of valves for food processing - European Hygienic Equipment Design Group (1996) EHEDG Doc 14
A Method for the Assessment of In-Place Cleanability of Moderately-Sized Food Processing Equipment - European Hygienic Equipment Design Group DG (1997) EHEDG Doc 15
Hygienic Pipe Couplings - European Hygienic Equipment Design Group (1997) EHEDG Doc 16
Hygienic Design of Pumps, Homogenisers and Dampening Devices - European Hygienic Equipment Design Group (1998) EHEDG Doc 17
Passivation of Stainless Steel - European Hygienic Equipment Design Group (1998) EHEDG Doc 18
A method for Assessing Bacterial Impermeability of Hydrophobic Membrane Filters - European Hygienic Equipment Design Group (2000) EHEDG Doc 19
Hygienic Design and Safe Use of Double-Seat Mixproof Valves - European Hygienic Equipment Design Group (2000) EHEDG Doc 20
Challenge Tests for the Evaluation of the Hygienic Characteristics of Packing Machines - European Hygienic Equipment Design Group (2000) EHEDG Doc 21
General Hygienic Design Criteria for the Safe processing of Dry Particulate Materials - European Hygienic Equipment Design Group EHEDG Doc 22
Production and Use of Food-Grade Lubricants - European Hygienic Equipment Design Group EHEDG Doc 23
Desinfektionsmedel
Lilian Hamilton, Apoteksbolaget 1989
Renhetsteknik- Ytors renhet – Ytrenhetskod - Svensk Standard SS 2678 1993
Renhetsteknik – Vätskors renhet – Översikt över kontrollmetoder - Svensk Standard SS 2679 1993
Renhetsteknik – Renhetskontrollerad verkstadsmiljö - Svensk Standard SS 2680 1995
cGMP – Food Plant Sanitation
Willbur A. Gould, CTI
Publications, Inc. (1994)
Cleanroom Design
William Whyte, John Wily & Sons (1991),
ISBN 0-471-92814-3
Contamination Control and Cleanrooms
Alvin Lieberman, Van
Nostrand Reinhold (1992), ISBN 0-442-00574-1
Clean Room Design – Minimizing Contamination Through Proper
Design
Bengt Ljungquist, Berit Reinmüller, Interpharm Press, Inc. (1997),
ISBN 1-57491-032-9
Encyclopedia of Cleanrooms, Bio-cleanrooms and Aseptic
Areas
Philil R. Austin, Contamination Control Seminars (1995)
Handbook of Contamination Control in Microelectronics –
Principles, Applications and Technology
Donald L. Tolliver (ed.), Noyes
Publications, Inc., ISBN 0-8155-1151-5
Federal Standard 209 E – Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones - FED-STD-209E
Military Standard 1246 C – Products Cleanliness Levels and contamination Control Program - MIO-STD-1246C
Introduction to Contamination Control and Cleanroom
Technology
Matts Ramstorp, Wiley-VCH (2000), ISBN 3-527-30142-9
Contamination Control in Practice
Matts Ramstorp, Wiley-VCH
(2003), ISBN 3.527.30776-1
Practical Cleanroom Design
R.K. Schneider, Business News
Publishing Company (1995), ISBN 1-885863-03-9
Cleanroom Technology – Fundamentals of Design, Testing and
Operation
William Whyte, John Wiley and Sons (2001), ISBN 0-471-86842
Renhetsteknik och Rena Rum – En Introduktion
Matts Ramstorp,
BioTekPro AB (1997), ISBN 91-973258-0-5
Renhetsteknik – Filtrering och Sterilisering
Matts Ramstorp,
BioTekPro AB (1999), ISBN 91-073258-1-3
Renhetsteknik -Processdesign och Processmedier
Matts Ramstorp,
BioTekPro AB (2002), ISBN 91-973258-2-1
Principles of Food Sanitation
Norman G. Marriott, Aspen
Publishers (1999), ISBN 0-8342-1232-3
Food Hygiene, Microbiology and HACCP
S.J.Forsytheand P.R.
Hayes, Aspen Publishers (1998), ISBN 0-84-342-1815-1